Eco Mode is not working on my Dolphin Liberty
Eco Mode is included with the Dolphin Liberty 200 (manufactured in 2024 onwards), 300 and 400.
Make sure that the Eco Mode feature is activated correctly:
1. Press the Power (ON) button to activate the feature until the LED lights up.
2. Press the Power (ON) button again for more than 6 seconds (ignore the blinking purple LED, continue pushing the Power button).
3. Stop pressing the Power (ON) button when the green LED blinks 3 times (this means it has been programmed). Place the robot in the pool, and it is supposed to start working within 30 seconds.
- If you see the robot worked only 1-2 times over the week (and not 3 times, as programmed), this means that the initial battery state was not full. Make sure to program the Eco Mode (weekly timer function) with a full battery.
- For Liberty 300 and 400, if you see that the robot is not climbing and working for more than 30 minutes, this means that the Cycle Selector was set instead.
To make sure that you have activated the Eco Mode, it is important to ignore the blinking purple LED lights and to continue pushing the button until you see the LED blinking green.
To cancel the Eco Mode, take the robot out of the pool and connect it to the charger.