FAQ

S50 (Cayman, T15, T25, Active 10, Escape, Encore, E20, E25)

S100 (Advantage, Proteus DX3, Saturn, Echo, Nautilus CC, Active 15, Escape, Liberty 200/300)

Take out the old filter panels

1. Open the filter cover.
2. Remove the filter basket from the robot.
3. Click on the top plastic part on the wide side of the filter, and pull up the panel that pops out. The side (narrow) panels can be removed easily, and the front and back panels need to be released by unscrewing them with a Phillips-head screwdriver.
4. Repeat on the other side panel of the filter.

Install the new filter panels

1. Take the new filter panel and slide it into the filter basket.
2. Press it up against the filter frame until you hear a click.
3. Repeat the same action for the other side panel of the filter.
4. When both of the panels are placed inside the filter bag, clip the bottom part of the filter back in place.

S200 (E30, Advantage Ultra, Active 20, Quantum, T30, Proteus DX4)

S300 (E35/E35i, Proteus DX5i, Active 30, T35/T45, Premium 40, Explorer E30, E40i, Active 30i, T55i)

S400 (E50i, Active 50, Explorer E50)

Take out the old filter panels

1. Open the filter cover.
2. Remove the filter basket from the robot.
3. Click on the top plastic part on the side of the filter, and pull up the panel that pops out.
4. Repeat on the other panels of the filter- narrow and wide.

Install the new filter panels

1. Take the new filter panel and place it in the bottom rail of the filter.
2. Push it into the frame until it clips back inside the filter.
3. Press it up against the filter frame until you hear a click.
4. Repeat on the other panels of the filter- narrow and wide.

Take out the old filter panels

1. Open the filter covers and remove filter cartridges from the robot.
2. Unclasp the clips on the top of the cartridge.
3. Check the non-return flap for any debris.
4. Make sure the frame is clean before installing the new panels.

Install the new filter panels

1. Insert the locating tabs at the bottom of the filter panels into their grooves on the base frame.

Take out the old filter panels

1. Open the filter covers and remove filter cartridges from the robot.
2. Unclasp the clips on the top of the cartridge.
3. Check the non-return flap for any debris.
4. Make sure the frame is clean before installing the new panels.

Install the new filter panels

1. Insert the locating tabs at the bottom of the filter panels into their grooves on the base frame.

Take out the old filter panels

1. Open the filter cover.
2. Remove the filter basket from the robot.
3. Click on the top plastic part on the side of the filter, and pull up the panel that pops out.
4. Repeat the same action for the other panels of the filter- narrow and wide.

Install the new filter panels

1. Take the new filter panel and place it in the bottom rail of the filter.
2. Push it into the frame until it clips back inside the filter.
3. Press it up against the filter frame until you hear a click.
4. Repeat the same action for the other panels of the filter- narrow and wide.