How to replace the tracks on my Dolphin robot?
Follow these steps to change the tracks on your robot:
- Unplug the power supply from the outlet.
- Turn the robot upside-down.
- Remove the tracks from the robot.
- Reinstall the new tracks on each side.
- Rotate the brush to ensure that the tracks are installed properly.
- Unplug the power supply from the outlet
- Lower the handle and flip the robot over onto its backside
- Using a screwdriver, remove the back brush from its sockets
- Gently remove the brush without removing the tracks from their place
- Using your hands, pull the front bush out of the sockets
- Unscrew and remove all four side panel screws, and remove the side panel
- Remove the rubber track
- Unscrew and remove all four side panel screws, and remove the side panel on the other side
- Remove the rubber track
- Reposition the new tracks and reposition the side panels with the four screws on the side. Repeat on the other side.
- Install the brushes in the designated sockets
- Flip the robot back to its original position and straighten the handle