The impeller is clogged on my Wave 90i - how do I clean it?
Follow these steps to clean the impeller:
- Unplug the power supply.
- Open the top lid and remove the filter.
- Release and remove the two screws holding the motor unit cover.
- Gently pull the motor unit cover and slide it along the blue cable.
- Remove the manifold and then the water adjuster tube.
- Clean the debris trapped in the impeller. Exercise caution with the impeller blades - they are sharp.
- Reinstall the water adjuster tube and manifold back into place.
- Slide the motor unit cover along the blue cable back into position. Fasten the cover with the screws.
- Return the filter and close the top lid.