What special settings are available on my Liberty 200 & 300?
Eco Mode Timer (Liberty 200 - manufactured in 2024 onwards, Liberty 300 & 400)
The Eco Mode is a setting that can be set once a week and the setting will last for one charge. Once the Eco Mode is programmed, the robot will automatically clean the pool floor for 30 minutes, three times a week.
- To activate the Eco mode, press the Power button. After the battery LED lights up, press the Power button again for 5-8 seconds, then the Power button LED will blink 3 times purple, and 3 times green.
- The LED will continue blinking for as long as the Eco mode is active, including the sleep intervals of 48 hours.
To deactivate the Eco Mode, take the robot out of the pool and connect it to the charger. Another way to deactivate the Eco Mode is to press the Power button for 4 seconds.
Cycle Selector (Liberty 300 & 400)
On the Liberty 300, you can use the Cycle Selector feature to program the robot to clean the Floor Only. With the Liberty 400 you can choose between three cycles: Regular, Floor Only, or Ultra Clean. The setting will last for one charge.
- To activate the Cycle Selector, press the Power button.
- After the battery LED lights up, press the Power button again for 3-5 seconds, then the Power button LED will blink 3 times purple.
Once the power button is pressed again or the robot is connected to the charger – the robot will revert to the default floor and wall cleaning mode.
End of Cycle Pickup (Liberty 300 & 400)
During the last 7 minutes of the cycle, the robot will climb every wall and wait for 20 seconds on the waterline for pick up.